Search

$49 Talking House - NOT the enhanced version

23 posts / 0 new
Last post
$49 Talking House - NOT the enhanced version

For those who wnat to experiement:

http://www.iamradio.net/

Enhanced?

What does the enhanced version do that this does not?

Thanks.

Jim

Jim Henry HBR Radio 1610, serving Honey Brook, PA. and NW Chester County.

The Iam version has an

The Iam version has an improved audio fidelity circutry.. I don't know how much better it sounds  since I've never heard any Talking House before. I am tempted to get one of these due to the bargain price.. At least it is a 5.0 version which is supposed to sound better than any previous version.

But it might be a mute point, because it appears the modified improved fidelty versions have been discontinued as of last month.. I wonder what the reason for that. The 5.0 (but still named iAM) is now the only version available.

Rich Powers Part15, Take 2..

Taking House v5

I think for the work they put into it the ROI was not there.  I purchased one of the modified units and it does sound MUCH better.

Druid Hills Radio AM-1710- Dade City, FL. Unlicensed operation authorized by the Part 15 Department of the FCC and our Resident Hobby Agent.  

I can take pictures and

I can take pictures and provide detail of the mods if that would help?

Druid Hills Radio AM-1710- Dade City, FL. Unlicensed operation authorized by the Part 15 Department of the FCC and our Resident Hobby Agent.  

Comparison Video from Hobby Broadcaster

Druid Hills Radio AM-1710- Dade City, FL. Unlicensed operation authorized by the Part 15 Department of the FCC and our Resident Hobby Agent.  

I'm not sure what questions to ask

How bad is the $49 unit?

Does it do 100% modulation?

Is there audio distortion?  Or 

digital artifacts in the audio?

Is the audio response curve weird?

Does it sound like a telephone?

I'm confused.  I couldn't tell if it was

in the Hobby Broadcaster video

or not.  (Eyesight not too good.)

Nice video, by the way.

Brooce, Part 15 Hartford

NOISE AND STATIC RADIO

I'm not making this up

We are not at home, but at my 

sister-in-law's house.

Everybody left - - but I have been

staying back here taking care of

the dogs.  So...

I fell asleep on the couch.  The dream I

had was probably about the $49 transmitter.

It sure looked like it.  I took it apart and lost

most of the screws and some other little pieces.

Then something else happened in the dream.

I was moving furniture or something.

Then I woke up.  The dream is still clear in

my mind.  What a goofy chain

of events.

Brooce

 

NOISE AND STATIC RADIO

Part of Bruce's Dream

So that is what happened.

I have been finding small parts from a Talking House Transmitter showing up all over the house!

Bruce, I will return them to you. No, I mean to your dream.

Carl Blare

Hey Carl

My AMT-3000 is at least 10 years old

and is getting "rough around the edges"

from so many experiments in so many

different locations.

The above mentioned transmitter is

very tempting.   But I didn't expect to

fall asleep and dream about it.

That's really bonkers!   Still - it

might be a suitable backup for

the SS-Tran.

Oh well - back to the drawing board.

Brooce

NOISE AND STATIC RADIO

Post #7

So if anybody has any more info related to

the questions in Post #7 let me know.

Best Wishes

Brooce, Part 15 Hartford

NOISE AND STATIC RADIO

Oldie but a Goodie...

The following comments are subjective based on my personal experiences...

I've used the Talking House II for over 10 years.  When I first put it on the air, using the indoor wire antenna, I was not impressed with the performance.

Soon after I obtained the Talking House ATU, external antenna system.  Things improved greatly.  The range went from a few hundred feet to about half a mile.

Roof mounting with 4 short radials (12 to 15 feet) took the range up to about a mile.

The audio was a bit tinny, no low end.  I compensated with an external EQ box.  Later, after obtaining a schematic, I found that changing one coupling capacitor in the audio stage took the low freqency response from 300 Hz down to 30 Hz.  The sound became much fuller. 

It still had an odd warbling sound to it when my signal beat against a skywave signal on the same frequency at night as though my carrier was shifting in step with my audio.

Checking the transmitter output frequency I found it to be about 80 Hz off frequency.  I installed a small air variable capacitor at the phase locked loop oscillator crystal so the frequency could be precisely set.  Doing this seems to have eliminated the warbling effect.

The only other problem most have is the built in auto-tuner has a tendancy to get stuck.  The mechanism won't move.  Some tinkering and lubrication has helped but then again I don't use the internal tuner since I use the external ATU antenna system.

Today a have 5 Talking House II transmitters and 2 Talking House ATU antenna systems.

by MRAM 1500 

Charter Member - Association of Low Power Broadcasters

Chairman - ALPB

Mram, that's some valueable

Mram, that's some valueable first hand experience and modifications you describe, but based on the general consenses a stock Talking House 2 is an inferior model when compared to a stock Talking House 5, so your above response doesn't really address Micro's question about the 5.0 model.

I have no experience with any TH - But I know this much..  All Talking Houses were manufactured for 'speech quality" output and not particuarly suitable for music, and also are known for having poor quality control in production.

The only exception was when Radio Systems aquired the company in 2009 and then modified the existing version 4.0 and 5.0 models to inprove the audio (much the same, I presume as you did on your 2.0 models).. Those modified units the became rebranded the "iAM", and quality control was improved because each of those units were individualy tested before it was sent out to the consumer..

Now that Radio Systems has sold the company to ISS, those modifications are no longer being applied, and the iAM is now only a stock 5.0.. which I can only presume (and have heard others report) is superior to a stock 2.0 would be.  

I guess I haven't help much to answer the question either, but common sense dictates that if you can buy a brand new Certified AM transmitter for $49, don't expect premium quality performance, but that said, keep in mind these have been deemed perfectly acceptable for use in many state parks for years now as public information radio, so they aint complete garbage.

I still think they're a bargain for $49

Rich Powers Part15, Take 2..

Thanks you guys - you told me everything I needed to know

- - and more.

If I can get it I will.  But there are so many things

going on here - - I might not have time to do it.

I do very much like the idea of a self contained

unit.  I'm also prepared to deal with any problems

the unit might have.  Sometimes a "messed up" 

piece of electronics is more fun than one that 

is in perfect condition.

So, well see.

Thanks again!

Brooce

NOISE AND STATIC RADIO

Speaking of messed up electronics

I'll have to put a thread up about my

first vacuum tube phono oscillator.  THAT was

Messed Up.

Brooce

NOISE AND STATIC RADIO

Oops

This was an accidental duplicate of

the previous post.  I'm trying to eliminate/change

it.  I wonder what will hsppen.

Brooce

NOISE AND STATIC RADIO

I say get the TX and if

I say get the TX and if people like your station you may get donations.  Then you can buy a REAL AM TX like a Procaster or Rangemaster.  Then your signal may go 2 miles and you'll have fun.

Progressive Rock (Album Rock, Deep Tracks), Classic Rock

http://thelegacy.shorturl.com

More Power for Hobby Broadcasters

http://the-initiative.boards.net/

Other Than That...

Well Rich, it seems that since this thread was addressing the un-enhanced TH 5, I assumed that meant it does not have the audio quality of the enhanced TH 5. That being the case, the simple modification to the audio stage is probably all that is needed to open up the low end response. So if that brand new TH 5 just needs a little help to sound better, I think it's worth mentioning.

Other than that there's probably not a hill of beans difference in the 2 and the 5.

by MRAM 1500 

Charter Member - Association of Low Power Broadcasters

Chairman - ALPB

Few hundred feet?

By few hundred feet, do you mean about 200 feet in any direction before the signal fades out? At the moment, on foot my range is about 200 feet to the north, south, east or west without fading. when the signal completely fades on foot, its about 500 feet to the north, south, east or west of the transmitter site. In a car, the signal only gets 50 to 70 feet without fading, 100 to 150 feet of signal before a complete fade. And these specs are just with the indoor antenna and nothing else on a TH II.

Several Mods Were Made

1: Audio (more than just 1 cap)

2: Power Adjust for 100 mW DC input power

3: Netting Capacitor added for frequency adjustment

Druid Hills Radio AM-1710- Dade City, FL. Unlicensed operation authorized by the Part 15 Department of the FCC and our Resident Hobby Agent.  

The TH5s sold are enhanced

The TH5s sold are enhanced but not with the i.am enhancement. That said, FWIW the i.am version is still available on special order from ISS. (Just not for $49)

ISS also intends to bring back the external ATU.

I heard mention of that.. Bet

I heard mention of that.. Bet the ATU won't be $49 either.

Rich Powers Part15, Take 2..

I assume along with the ATI

I assume along with the ATI that you get the antenna.  Hope they make the ATU more efficient so you get the best range.

Progressive Rock (Album Rock, Deep Tracks), Classic Rock

http://thelegacy.shorturl.com

More Power for Hobby Broadcasters

http://the-initiative.boards.net/

Log in or register to post comments